Showing 1–18 of 49 results
-
Acceleration-Based Movement Sensor
The acceleration-based movement sensor uses an internal accelerometer to detect movement of an asset. When motion is detected that exceeds a certain threshold, an alert is sent over the wireless network.
-
Air Temperature and Humidity Sensor
By Radio Bridge.
The air temperature and humidity sensor uses air flow to measure temperature and humidity levels. If the temperature and/or humidity rises above or falls below the configured thresholds, an alert is sent over the wireless network.
-
Alert Press
The button can be used in a fixed place or with a geolocation service activated.
When the user presses the button, it sends an early warning signal to companies for security applications, to insurance companies for accidents applications, to hospital/ambulances for health emergencies applications, and so on. -
Animal Tracker
This collar can be used in any kind of animal.
It is composed by a wireless sensor that transmits their location in a periodical way.
Can be used with 5 geofences for each sensor.
It sends notifications via email and SMS.
-
Cold Tracker
Wireless sensor installed in refrigerators for monitoring temperature in a periodical way.
In addition, it senses the refrigerator’s location.
It sends notifications via email and SMS.
-
Datalog IOT
Multi sensor device for remote monitoring system
Intelligent and easy configurable APP and WEB monitoring applications, plus local sensing devices set for humidity and temperature measuring.
To expand base sensing capabilities, solicit any desired sensor (such as PT100 RTDs, Thermocouples, CO2 sensors, etc.) to OEM.Features
+ Visualization
+ Responsive WEB and APP interface for visualization of:- Sensed variable state.
- Battery level.
- AC connector.
- Sigfox signal quality.
- Graphic record of each variable for up to 2 years.
+ External alarms by SMS, e-mail and Telegram messaging service.
-
Devkit V2.0
Get Sigfox-on board with this all-features Development Kit. Connect more than 8 sensors and empower your IoT curiosity & skills, even if you are not a hardware-genius. Exclusively designed for tech startups, tech lovers, design houses, schools & universities, and anybody who wants to jump in IoT and make their ideas a prototype in less than an hour.
Programm it in IDE Arduino. The IoT made easier than easy.
-
Digitanimal
Digitanimal is a service platform to monitor and locate livestock animals composed by a IoT collar and algorithms to improve farming.
-
Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the Sigfox network.
-
Dry Contact Sensor
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the Sigfox network.
-
Electronic Active Seal
Our security electronic seal makes easier, faster, cheaper and safer, the chance to have a real-time notification over the opening or violation of cargo or any kind of seal, by using an opening alarm generated by the security electronic seal.
The installation is quite simple and an important difference from other current solutions is that it is not necessary to spend money into inverse logistics because it is designed for one use only.
Besides the opening notification, the security electronic seal lets the user monitor the container during established periods of time, showing the seal permanency and the active status of the seal. Its autonomy can last 30 days, but this time depends on the design of each project and the regularity of the transmission.
-
External Probe Temperature Sensor
The external probe temperature sensor measures temperature using an external temperature probe. If the temperature rises above or falls below the configured thresholds, an alert is sent over the wireless network.
-
Firefly
Firefly Sigfox is a cutting-edge solution to improve time response to fuse cut out in MV lines in the field.
-
GLOKE Asset Tracking
GLOKE self-sufficient asset tracking device, ideal due to the low installation cost and no maintenance. The device is designed with all automotive standards to last in toughest environments. As standard GLOKE will send 140 messages a day (one message every 11 minutes).
If the device can’t be exposed to the light, we offer an alternative version, which comes with ability to connect DC input or run on internal battery pack. Battery pack will last, depend on send message frequency up to 10 years.
There is no GSM tracker which could compete with GLOKE.
Main device functionality :
• Self-sufficient device, with additional power supply option
• Up to 140 messages per day
• Long lasting battery, depend on send message frequency up to 10 yearsMain platform functionality :
• API for 3rd party software integration
• Reporting
• Geofence function
• Overall map with location of all customer assets
• Detailed map per device, ability to
• Check current location address
• Check battery status
• Check temperature status
• Check history – this gives travel logW: www.gloksystems.co.uk
@: info@gloksystems.co.uk
T: 01842 646003 -
GOLEM
GOLEM is a high tech device designed to monitor and optimize soil quality in a variety of environments.
This system is ideal to automatize the complete solution, by having sensors taking sample readings in real-time, it is possible to detect when one of the parameters is not in an ideal condition, hence making it easier to take action to solve it. For example, if soil moisture is dropping, GOLEM can be programmed to send a command to activate water pumps to moisturize the field. -
iButton
iButton is the ultimate IoT Sigfox button that needs just a click to send alert messages, events, and locations in real time.
-
-
KRAKEN
KRAKEN is a precise and complete water quality control system.
It combines hardware and engineering in a single device capable of detecting variations in the properties of water and it is designed to be implemented in any environment. The impact of KRAKEN reduces costs in water maintenance and increases productivity. Notify the exact water conditions in different places through your mobile app. It is ideal for industrial systems, hydrological plants and any company. Its operation is continuous, and allows you to monitor and make decisions at any time and from any place, reducing costs and working time.
